TRASH
CAR RULES
" Stock Class - Front wheel drive, 4 cylinder 2000 cc or less,
with the exception of the Dodge Omni, which is a 2.2
" Modified Class- Front wheel drive, V6, or any 4 cylinder
over 2000cc.
The
following rules apply to both classes:
" Cars must be stock appearing, no trimming of body parts.
" All glass except for the front windshield, molding, emblems,
head, tail and marker lights must be removed. Screws or any
other objects that might end up on the arena floor or track
surface must be removed also.
" Any car dragging debris which the flagman or officials
consider a hazard to the fans or other drivers will be black
flagged. Example: bumper, broken axle, loose hood.
" Any driver driving in a reckless manner which the flagman
considers to be dangerous will be black flagged. No drivers
door contact.
" Fuel- cars should only have as much fuel as needed to
complete the event. Do not top off fuel tanks- keep to a minimum.
" No reinforcement of any kind.
" No mirrors
" Battery must be tied down tight- no bungee straps.
" No studded tires
" No weight added to the car
" Car must be vacuumed clean of debris
" Good helmet, long sleeve shirt and pants required. No
cut offs or shorts.
" Roll over post located behind drivers seat bolted to
the floor and bolted to the roof.
" Doors must be chained shut; this will lessen the chances
of doors popping open during the event.
Car
Numbers- Car numbers should be on the driver door, passenger
door and roof. Number on the roof should have bottom of number
on the passenger side with the top of the number towards the
driver side. Numbers should be large and bold. This is for the
driver's benefit; numbers that can't be read by the scorekeeper
are difficult to track on the score sheet. One could actually
win a race but if the car number is not readable, you could
possibly not be scored.
Recommendations:
We
recommend all drivers have full face helmets, fire suit, neck
brace, gloves, driver's door protection and fuel cell: However,
it is not required.
Options:
" 4 post cage allowed. No reinforcement forward or backward of
4 post.
" Driver's door protection. Example: 1x3 tubing inside
front fender well to inside rear fender well must have four
bolts 3/8 inch or longer with plastic lock nuts, two in driver's
door, one in each fender. No welding.
It
is the intent of TMSI to keep the trash car class and events
inexpensive, exciting and safe for all involved. However, it
is also our intent to protect the racing facilities which we
use. If at any time or during the event we feel you or your
car is a detriment to the sport, TMSI, your fellow driver's
or the facilities, we reserve the right to refuse or terminate
service. NO alcohol consumption prior or during any and all
events.
If
you have questions, please contact Bill Arnold:
Day:
541-258-8503
Cell: 541-619-8135
Eve: 541-258-6888